banner
Home / News / Industry News / Why do bulletproof plates resist bullets?

Why do bulletproof plates resist bullets?

Views:3     Author:Site Editor     Publish Time: 2019-10-17      Origin:Site

Why do bulletproof plates resist bullets?

It is obviously necessary to have professional bulletproof equipment in the midst of heavy gunfire. Is bulletproof plate one of the champions? What is the bulletproof plate made of? How does it withstand bullets? How should we clean and maintain the body armor plate?

 

What are the parts of a bulletproof vest?

Production process of bulletproof plate

What is the function of bulletproof plate?

How to assemble and wear body armor?

How to store and check bulletproof vest?

 

What are the parts of a bulletproof vest?


First, it is important to understand that your vest consists of the following parts: front and rear brackets, front and rear bulletproof plates, and soft wound inserts


As well as straps and belts (you should receive two sets of straps and belts. A four and a six. When the vest is assembled, only a set of shoulder straps and belts are used.) the main component of the vest is the bulletproof plate, which is placed on the chest and back. The characteristics of the bulletproof plate depend on the intended design for soft or hard bulletproof clothing. In order to wear the panel, the panel must be inserted into the frame.

 

The inside of the armor is where the bullets stop. External brackets are primarily decorative and designed to be worn with uniforms or neutral enough to go with anything. However, the interior is made up of two different materials that work together to produce the actual braking force of the vest.

 

Production process of bulletproof plate


Body armor plates are usually a combination of bulletproof fabric and ceramics. The fibers need to be wound together to make them strong and strong enough. The fabric is covered with resin and placed between layers of plastic. Advanced fibers not only prevent bullets from penetrating, but also prevent trauma-related injuries in the affected area by dispersive forces on the surface of the plate. Ceramics were added to the mixture to provide more protection. Ceramics can be movable or built into body armour. For removable decks, both types may be valid depending on the wearer's use.

 

What is the function of bulletproof plate?


Although soft armor with counterpoint aramide lines is primarily designed to prevent pistol bullets from penetrating, such as 9mm,.40, and.357, additional protection is sometimes required in high-risk situations. This is where the bullet stops the second element in the world from working. Bulletproof plates (also known as wound plates), usually made of metal or ceramic, can be inserted into the front and back of a bullet-proof vest to add a second layer of protection to prevent higher-speed bullets, such as higher-power pistols fired from rifles or some rifles.

 

To assemble the bulletproof vest, the owner must insert the bulletproof plate into the cradle and keep the STRIKE FACE away from the body. This is important because the bulletproof plate has a hybrid design and each layer performs very specific tasks in a specific order. Improper installation of bulletproof plates can cause serious personal injury or even death. After determining the correct direction to insert the bulletproof plate, determine the anti-theft suspension system on the side of the front and rear bulletproof plates, which consists of rings for each area. d 'shoulders. The system allows the front and back to be connected to the inside of the stand with the panel in place. After installation, carefully pull the bottom of the panel to secure the Velcro. Finally, place the body cover vertically and close the front and rear support zippers.


How to assemble and wear body armor?


When adjusting the vest for the first time, place the front and back of the vest on a flat surface, and then freely attach them to the belt. The vest can have multiple belts. However, you only need one set, and if necessary, you should use another set for replacement. Choose the belt length that will bring you maximum comfort. First lift the vest over your head. The front panel should be on the chest and the back should be on the back. Now choose the belt length that will bring you maximum comfort. Loosen the belt and connect the rear panel to the front panel.

 

Next, it is important to adjust the vest to the sitting position. After sitting, readjust the shoulder straps and belt for comfort. Remember, the vest only protects what it covers. Therefore, it is important to adjust the vest so that it is not too low or too high. The basic rule is to place the vest an inch below the cut in the clavicle. In addition, a vest that is too long can seriously affect the work belt, causing wrinkling or crimping when sitting down.

 

Finally, make sure the front and back panels overlap evenly on both sides of the vest. The overlap provides you with side bulletproof protection. If overlap protection is uneven, readjust the vest and belt to provide even protection. Be sure not to wear a vest too tight as it may limit your mobility and cause unnecessary wear on the bulletproof plate.

 

When the bulletproof vest is set to a comfortable level, you can add additional bulletproof accessories, such as a soft trauma pad or a special protective plate. Special threat prevention signs are a good way to improve the protection of body armor. Depending on the type of support, you can put this card in an internal or external pocket. For brackets with external pockets, remove the velcro lock on the front of the bracket and insert the board into the front of the flexible winding connector. For luggage compartments with internal lower luggage bags, open the hidden external zipper at the bottom of the luggage compartment, and then pull it inside the luggage compartment to find the luggage bag. Open the Velcro in your pocket and place the board in front of the insert on the flexible reel.

 

How to store and check bulletproof vest?


Properly stored and checked bulletproof vests can help you maintain armor life. The best way to store vests is flat, not at the edges, and not tied in a bunch. Be sure to store it in a clean, dry place without direct sunlight. Do not place anything on it and do not store vests in the back seat or trunk of your car. Regular inspection of vests is also important to maintain good performance. Each component should be separated before cleaning. Make sure the bulletproof plate is removed from the front and rear brackets. To do this, loosen the lifting lugs located in the shoulder area of the vest. Finally, make sure that all trauma plates and bands are also removed from the bracket.

 

Body armor plates are so important to the public all over the world, which is why qualified bulletproof plates must be chosen. If you are looking for rigorously tested high quality bulletproof panels, SHANDONG HUIERDA TRADING CO., LTD offers you the best products.

PRODUCTS

CONTACT US

Room 301, Building 2, Zhongjian jinxiu Plaza, Qingdao road,
Jinan city, Shandong province,China.

Allen Guo
+86-17661068546 (WhatsApp, Wechat)

SEND US A MESSAGE
Copyright   2019 SHANDONG HUIERDA TRADING  CO., LTD
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.
×